New BYAP CHIFT PIST System

earthbound

Over the last couple of days we've been working on a new system. Here are a few pics, shown off by Joker our mascot.. We will be getting some proper steel legs for it very soon, bricks are only temporary.

Attachment:

PC120641 (Medium).JPG [129.84 KiB]
Downloaded 3558 times

500L drain tank, plenty of sump space to look at expanding perhaps with some extra vertical add ons NFT or similar.

Attachment:

PC120639 (Medium).JPG [170.05 KiB]
Downloaded 3556 times

Handy viewing window in the side of the 1000L tank, great if your a dog or if you have small people..

Attachment:

PC120633 (Medium).JPG [134.17 KiB]
Downloaded 3550 times

Extra growing space on the surface of the fish tank with easy to slot in plant "6 packs", we'll cover most of the surface with these to keep the fish happy, cut down evaporation, and increase plant production. We still have a gap at the front for feeding, and the mesh can be lifted easily if need be..

Attachment:

PC120635 (Medium).JPG [135.01 KiB]
Downloaded 3550 times

Made to fit into narrow spaces.

Attachment:

PC120637 (Medium).JPG [ 122.73 KiB | Viewed 7769 times ]

Here you can see silvers on the bottom of the tank, the SLO is going to have some more holes drilled in the base because leaves are catching, and see how perfectly the puts fit in the mesh and sit just in the water..

Attachment:

PC120636 (Medium).JPG [89.58 KiB]
Downloaded 3547 times

We'll be playing around with it a bit more over the coming weeks, as we figure out more things to improve with it...

mantis

Nice. Does the fish tank have a sloping conical floor?

Jamey

I Love it Joel

earthbound

Na it's just a flat base, had to lift it up off the ground to get some more height. Originally we were going to use a 250L tank for the drain but figured we needed to go bigger.

chillidude

I like the idea.

What about your GB vol to FT vol ratio though ? Adding more GBs as spokes ?

antsplants

Do u have total size measurements for the length and width?

mantis

Looks to be designed for narrow areas but could be added onto easily enough. GB to FT ratio , just tell user to stock to growbed capacity, and explain why

earthbound

Yeah just stock fish to the bed size/plants no matter what the fish tank size...

Dunno the full actual size yet, will have to measure it......

bigdaddy123

Hi Joel looks good,

What size air pump are you running?

Is your SLO an airlift or run by the water pump?

Cheers.

chillidude

earthbound wrote:

Yeah just stock fish to the bed size/plants no matter what the fish tank size...

Cool, was just curious. That's essentially what I'm doing - there's no way I'm ever going to get 12,000L of GB space

earthbound

It's running on a water pump with the air stones just hanging down next to the SLO pipe, one of our AC/DC air pumps.

Dufflight

Does the air stone thro much water into the air(onto the mesh).

Bigger holes cut into into the PVC above the water line will help if there are a lot of leaves getting into the water. The SLO in my smaller tank has the water go over the top of the T if I let too much water go through the tanks or a fingerling tries to swim through the pipe.

Mooreponics

Looks great. Love the window on the tank.

Food&Fish

Looking good Joel cp seems the way to go i see you use 90 mm pipe excellent
seeing you are selling systems to make it easier to see the junk rising put an elbow at the top of the center pipe and put your tee [ top open just before the water exits the fish tank ]

freoboy

Nice lookin system Joel

why did you go for a centre pipe on the gb instead of the usual BYAP arrangement??

Backyard Aquaponics
A place to discuss aquaponics