Backyard Aquaponics
http://www.backyardaquaponics.com/forum/

AP parts to give away - SYDNEY
http://www.backyardaquaponics.com/forum/viewtopic.php?f=8&t=27845
Page 1 of 1

Author:  BuiDoi [ Oct 15th, '16, 07:27 ]
Post subject:  AP parts to give away - SYDNEY

..
We don't have any room for MORE AP/RAS stuff and so I have some bits available.. near HURSTVILLE
PLUS - there is no point to more FT's as we have way too many fish anyway ( like about 250 )

So I have the following as surplus

one - IBC Bladder - TOP 1/3

and I bought a damaged FG water tank and split it into two 1000L halves
So - round and being fibre glass, easily repaired (ie- glass in the opening etc)
These will make magic FT's

and there is a a BLACK Screw-Top Barrel - SPLIT down the length and they can be re-joined at their neck to make a long GB

0490 131 047 sms and mention BYAP - Peter

Author:  signore [ Oct 16th, '16, 19:39 ]
Post subject:  Re: AP parts to give away - SYDNEY

Any photos of the 1000l fiber glass tanks?

Sent from my SM-N9005 using Tapatalk

Author:  Nelson Wheeler [ Mar 16th, '19, 02:11 ]
Post subject:  Re: AP parts to give away - SYDNEY

BuiDoi wrote:
..
We don't have any room for MORE AP/RAS stuff and so I have some more bits available.. near HURSTVILLE
PLUS - there is no point to more FT's as we have way too many fish anyway ( like about 250 )

So I have the following as surplus

one - IBC Bladder - TOP 1/3

and I bought a damaged FG water tank and split it into two 1000L halves
So - round and being fibre glass, easily repaired (ie- glass in the opening etc)
These will make magic FT's

and there is a a BLACK Screw-Top Barrel - SPLIT down the length and they can be re-joined at their neck to make a long GB

0490 131 047 sms and mention BYAP - Peter


any photos ?

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/