Backyard Aquaponics
https://www.backyardaquaponics.com/forum/

need advice
https://www.backyardaquaponics.com/forum/viewtopic.php?f=8&t=31569
Page 1 of 1

Author:  bobb11 [ May 3rd, '21, 23:46 ]
Post subject:  need advice

I am putting together a new system one 1500lt ft two grow beds that are 2m long and 1m wide, with a bell Siphon in each. my question is is it better to have one place for the water to enter the gb or do you run the pvc around the edge of the gb. As i have seen both on the net and not to sure what way to go. :thumbright:

Author:  Dangerous Dave [ May 4th, '21, 03:58 ]
Post subject:  Re: need advice

Simpler and cheaper to have one point of water entry and it's worked well for me for years. Mine is at opposite end of GB to the siphon.

I can't say that having multiple points is wrong. But I suspect it's unnecessary.

Will be interested in other comments.

Sent from my Pixel 5 using Tapatalk

Author:  bobb11 [ May 4th, '21, 16:24 ]
Post subject:  Re: need advice

Thanks dave this was my though as well but the web can be confusing some time with so many different ways

Author:  danny [ May 6th, '21, 01:28 ]
Post subject:  Re: need advice

my guess would be that in flood and drain systems with bell siphons etc it doesnt matter at all, while with constant flood systems having a spatially distributed input design might be beneficial to ensure even flow throughout the bed.

Page 1 of 1 All times are UTC + 8 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/